Interfacial mixing during annealing of zinc oxide nanoparticle junctions

The process of forming a junction between crystalline zinc oxide (ZnO) nanoparticles during pulsed thermal annealing in liquid tetradecane is studied using molecular dynamics simulation. Pairs of equal and unequal size particles are considered with emphasis on neck growth and atom mixing. The contact area and interface width of the junction are found to increase with heat pulse power albeit at different rates. The results suggest that it is possible to increase the junction area without significant mixing of atoms across the junction interface by tailoring the heat pulse power

Exceptional Anti-Icing Performance of Self-Impregnating Slippery Surfaces

A heat exchange interface at subzero temperature in a water vapor environment, exhibits high probability of frost formation due to freezing condensation, a factor that markedly decreases the heat transfer efficacy due to the considerable thermal resistance of ice. Here we report a novel strategy to delay ice nucleation on these types of solid-water vapor interfaces. With a process-driven mechanism, a self-generated liquid intervening layer immiscible to water, is deposited on a textured superhydrophobic surface and acts as a barrier between the water vapor and the solid substrate. This liquid layer imparts remarkable slippery conditions resulting in high mobility of condensing water droplets. A large increase of the ensuing ice coverage time is shown compared to the cases of standard smooth hydrophilic or textured superhydrophobic surfaces. During deicing of these self-impregnating surfaces we show an impressive tendency of ice fragments to skate expediting defrosting. Robustness of such surfaces is also demonstrated by operating them under subcooling for at least 490hr without a marked degradation. This is attributed to the presence of the liquid intervening layer, which protects the substrate from hydrolyzation enhancing longevity and sustaining heat transfer efficiency.Comment: This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Materials & Interfaces, copyright (c) American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see pubs.acs.org/doi/abs/10.1021/acsami.7b0018

Large-scale integration of single-walled carbon nanotubes and graphene into sensors and devices using dielectrophoresis: A review

Device and sensor miniaturization has enabled extraordinary functionality and sensitivity enhancements over the last decades while considerably reducing fabrication costs and energy consumption. The traditional materials and process technologies used today will, however, ultimately run into fundamental limitations. Combining large-scale directed assembly methods with high-symmetry low-dimensional carbon nanomaterials is expected to contribute toward overcoming shortcomings of traditional process technologies and pave the way for commercially viable device nanofabrication. The purpose of this article is to review the guided dielectrophoretic integration of individual single-walled carbon nanotube (SWNT)- and graphene-based devices and sensors targeting continuous miniaturization. The review begins by introducing the electrokinetic framework of the dielectrophoretic deposition process, then discusses the importance of high-quality solutions, followed by the site- and type-selective integration of SWNTs and graphene with emphasis on experimental methods, and concludes with an overview of dielectrophoretically assembled devices and sensors to date. The field of dielectrophoretic device integration is filled with opportunities to research emerging materials, bottom-up integration processes, and promising applications. The ultimate goal is to fabricate ultra-small functional devices at high throughput and low costs, which require only minute operation powe

Thermal conductivity reduction in core-shell nanowires

Nanostructuring of thermoelectric materials bears promise for manipulating physical parameters to improve the energy conversion efficiency of thermoelectrics. Using nonequilibrium molecular dynamics, we investigate how the thermal conductivity can be altered in core-shell nanocomposites of Si and Ge. By calculating the phonon vibrational density of states and performing normal mode analysis, we show that the thermal conductivity decreases when phonon-transport becomes diffusion-dominated and unveil a competition between modes from the various regions of the nanocomposite (core, interface, and shell). The effects of nanowire length, cross section, and temperature on thermal conductivity are explicitly considered. Surprisingly, the thermal conductivity variation with nanowire length is much weaker than in pure nanowires. Also, the thermal conductivity is almost independent of temperature in the wide region between 50 and 600 K, a direct result of confinement of the core by the shell. These results suggest that core-shell nanowires are promising structures for thermoelectrics

Cascade Freezing of Supercooled Water Droplet Collectives

Surface icing affects the safety and performance of numerous processes in technology. Previous studies mostly investigated freezing of individual droplets. The interaction among multiple droplets during freezing is investigated less, especially on nanotextured icephobic surfaces, despite its practical importance as water droplets never appear in isolation, but in groups. Here we show that freezing of a supercooled droplet leads to spontaneous self-heating and induces strong vaporization. The resulting, rapidly propagating vapor front causes immediate cascading freezing of neighboring supercooled droplets upon reaching them. We put forth the explanation that, as the vapor approaches cold neighboring droplets, it can lead to local supersaturation and formation of airborne microscopic ice crystals, which act as freezing nucleation sites. The sequential triggering and propagation of this mechanism results in the rapid freezing of an entire droplet ensemble resulting in ice coverage of the nanotextured surface. Although cascade freezing is observed in a low-pressure environment, it introduces an unexpected pathway of freezing propagation that can be crucial for the performance of rationally designed icephobic surfaces

Three-dimensional concentration of light in deeply sub-wavelength, laterally tapered gap-plasmon nanocavities

Gap-plasmons (GP) in metal-insulator-metal (MIM) structures have shown exceptional performance in guiding and concentrating light within deep subwavelength layers. Reported designs to date exploit tapered thicknesses of the insulating layer in order to confine and focus the GP mode. Here, we propose a mechanism for the three dimensional concentration of light in planar MIM structures which exploits exclusively the lateral tapering of the front metallic layer while keeping a constant thickness of the insulating layer. We demonstrate that an array of tapered planar GP nanocavities can efficiently concentrate light in all three dimensions. A semi-analytical, one-dimensional model provides understanding of the underlying physics and approximately predicts the behavior of the structure. Three-dimensional simulations are then used to precisely calculate the optical behavior. Cavities with effective volumes as small as 10^(−5) λ^3 are achieved in an ultrathin MIM configuration. Our design is inherently capable of efficiently coupling with free-space radiation. In addition, being composed of two electrically continuous layers separated by an ultrathin dielectric spacer, it could find interesting applications in the area of active metamaterials or plasmonic photocatalysis where both electrical access and light concentration are required

Significant Reduction of Thermal Conductivity in Si/Ge Core-Shell Nanowires

We report on the effect of germanium (Ge) coatings on the thermal transport properties of silicon (Si) nanowires using nonequilibrium molecular dynamics simulations. Our results show that a simple deposition of a Ge shell of only 1 to 2 unit cells in thickness on a single crystalline Si nanowire can lead to a dramatic 75% decrease in thermal conductivity at room temperature compared to an uncoated Si nanowire. By analyzing the vibrational density states of phonons and the participation ratio of each specific mode, we demonstrate that the reduction in the thermal conductivity of Si/Ge core hell nanowire stems from the depression and localization of long-wavelength phonon modes at the Si/Ge interface and of high frequency nonpropagating diffusive modes

Boundary Conditions by Schwarz-Christoffel Mapping in Anatomically Accurate Hemodynamics

Appropriate velocity boundary conditions are a prerequisite in computational hemodynamics. A method for mapping analytical or experimental velocity profiles on anatomically realistic boundary cross-sections is presented. Interpolation is required because the computational and experimental domains are seldom aligned. In the absence of velocity information one alternative is the adaptation of analytical profiles based on volumetric flux constraints. The presented algorithms are based on the Schwarz-Christoffel (S-C) mapping of singly or doubly connected polygons to the unit circle or an annulus with unary external radius. S-C transformations are combined to construct a one-to-one invertible map between the target surface and the measurement domain or the support of the source analytical profile. The proposed technique permits us to segment each space separately and map one onto the other in its entirety. Tests are performed with normal velocity boundary conditions for computational simulations of blood flow in the ascending aorta and cerebrospinal fluid flow in the spinal cavity. Mappings of axisymmetric velocity profiles of the Womersley type through a simply connected circular pipe as well as through a doubly connected circular annulus, and interpolations from in-vivo phase-contrast magnetic resonance imaging velocity measurements under instantaneous volumetric flux constraints are considere

Printable Nanoscopic Metamaterial Absorbers and Images with Diffraction-Limited Resolution

The fabrication of functional metamaterials with extreme feature resolution finds a host of applications such as the broad area of surface/light interaction. Non-planar features of such structures can significantly enhance their performance and tunability, but their facile generation remains a challenge. Here, we show that carefully designed out-of-plane nanopillars made of metal-dielectric composites integrated in a metal-dielectric-nanocomposite configuration, can absorb broadband light very effectively. We further demonstrate that electrohydrodynamic printing in a rapid nanodripping mode, is able to generate precise out-of-plane forests of such composite nanopillars with deposition resolutions at the diffraction limit on flat and non-flat substrates. The nanocomposite nature of the printed material allows the fine-tuning of the overall visible light absorption from complete absorption to complete reflection by simply tuning the pillar height. Almost perfect absorption (~95%) over the entire visible spectrum is achieved by a nanopillar forest covering only 6% of the printed area. Adjusting the height of individual pillar groups by design, we demonstrate on-demand control of the gray scale of a micrograph with a spatial resolution of 400 nm. These results constitute a significant step forward in ultra-high resolution facile fabrication of out-of-plane nanostructures, important to a broad palette of light design applications. nanostructures, important to a broad palette of light design applications